FLASH HOBBY 40A ESC Brushless Electronic Speed Controller 36S BLHeli_32bit Controller for FPV Drone RC Racing Multirotor & Quadcopter

Descripción
Features: -With 32bit ARM Cortex MCU STM32F051 48MHZ microprocessor, throttle 2048 resolution ratio,strong ant-interference capacity. -Built-in sensor can be reaction of temperature, output power,output current etc, also programmable for protection. -Support BLHeli _32 firmware, can use the signal wire to upgrade the firmware or change the configuration on line. -Current Meter to help show current indication of OSD -With USB linker can be programmable throttle setting like support positive and negative two way mode FPV 3D mode,motor speed,braking, PWM frequency, inlet angle speed setting, onboard RGB LED for customize color, Beep etc. -It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM, Oneshot 125, Oneshot 42 Multishot and DShot 150/300/600/120
Características
The output continuous current is 35A, burst 40A up to 10 seconds. Support BLHeli_32 firmware can use the signal wire to upgrade the firmware or change the configuration online. With 32-bit ARM Cortex MCU STM32F051 48MHZ microprocessor, throttle 2048 resolution ratio and MOS, has strong anti-interference capacity and best efficiency RC speed controller is 3~6S lipo, which is support DShot 150/300/600/1200, PWM, Oneshot 125/ 42, Multishot and damped mode. Used the self-adaption control system and can go automatic with all kinds of motors. With full protection and double voltage protection, such as overheat protection, over-voltage protection, remote signal loss protection, low battery protection, etc. It is special optimization in multi-axis with fast response and great power, support FPV drone, multirotors, fixed-wing, helicopter, quadcopter and so on.
El número de Modelo (ItemModelNumber)
BL_ESC
Peso
3.00 Pounds
Dimensiones
1,36 x 0,4 x 0,1 pulgadas
Fabricante es FLASH HOBBY
Destacados
The output continuous current is 35A, burst 40A up to 10 seconds. Support BLHeli_32 firmware can use the signal wire to upgrade the firmware or change the configuration online., With 32-bit ARM Cortex MCU STM32F051 48MHZ microprocessor, throttle 2048 resolution ratio and MOS, has strong anti-interference capacity and best efficiency, RC speed controller is 3~6S lipo, which is support DShot 150/300/600/1200, PWM, Oneshot 125/ 42, Multishot and damped mode. Used the self-adaption control system and can go automatic with all kinds of motors., With full protection and double voltage protection, such as overheat protection, over-voltage protection, remote signal loss protection, low battery protection, etc., It is special optimization in multi-axis with fast response and great power, support FPV drone, multirotors, fixed-wing, helicopter, quadcopter and so on.