¡Lanzamiento Especial!
Descubre nuestra tienda especializada en productos importados de China.
Visítanos en: importadosdechina.yaxa.co
Descripción
Nut tightening tool used to turn lock nuts with one hole mixing faucet (approx. 1.8 inches (46 mm) on each side. The hex wrench can be used as a handle and can also be used to attach a polygon hole zarbo
Características
[Vertical tightening tool] Used for installing and removing lock nuts such as 1.8 inch (46 mm) on opposite sides. The space below the sink is very narrow and you may not be able to turn the lock nut properly with a regular side spanner. The square tightening tool is 7.9 inches (200 mm) long and allows for the installation and removal of the lock nut even in less space (Accessories Hex Spanner) When used in combination with the included hex spanner, it can be tightened and removed by using the tool alone. It can also be used as a 0.47 inch (12 mm) spanner on opposite side, and can be used when turning zarbo or socket (Size) Opposite side of the hexagonal nut tightening tool: Approx. 1.8 inches (46 mm), Opposite side of the included hex spanner: Approx. 0.5 inches (12 mm) Country of Origin: Japan Material: Alloy steel
El número de Modelo (ItemModelNumber)
R353
Peso
2.00 Pounds
Dimensiones
1,97 x 1,97 x 7,87 pulgadas
Fabricante es SANEI(旧社名:三栄水栓製作所)
Destacados
[Vertical tightening tool] Used for installing and removing lock nuts such as 1.8 inch (46 mm) on opposite sides. The space below the sink is very narrow and you may not be able to turn the lock nut properly with a regular side spanner. The square tightening tool is 7.9 inches (200 mm) long and allows for the installation and removal of the lock nut even in less space, (Accessories Hex Spanner) When used in combination with the included hex spanner, it can be tightened and removed by using the tool alone. It can also be used as a 0.47 inch (12 mm) spanner on opposite side, and can be used when turning zarbo or socket, (Size) Opposite side of the hexagonal nut tightening tool: Approx. 1.8 inches (46 mm), Opposite side of the included hex spanner: Approx. 0.5 inches (12 mm), Country of Origin: Japan, Material: Alloy steel
La calificación que le dan a SANEI R353 Nut Tightening Tool for Nut Type One-Hole Mixing Faucet Faucet for Hex Side 1.8 inches (46 mm) Length 7.9 inches (200 mm), 315 usuarios es de 3.8 sobre 5 estrellas.
Valoraciones
No hay reseñas todavía