ESI Sello de tapa prémium XL de 23 pies (2 pulgadas de ancho x 0.200 pulgadas de alto x 23 pies de largo) caucho EPDM para tapas de 200 libras o

Descripción
For truck caps that require less than 23ft of seal use Premium Cap Seal XL 20ft (ASIN: B00NCCX6C2). Seal can be easily cut in half to custom fit trucks with smaller width front bed rails. The two cut seals can also be doubled up to .340″ to fill height gaps from the side rails to the front rail. NOTE: To determine if you need to use a Front Rail Seal 6ft (ASIN: B00C0WVV72) measure the difference in height from the truck’s side bed rails (including, if any, bed rail caps) to the truck’s front bed rail. If the height of the gap is from .340″ to .487″ install Front Rail Seal on the cap’s front base rail and install Premium Cap Seal 20ft (ASIN: B00NCCX6C2) on the cap’s side base rails. If the height of the gap is extra-large, from .488″ to .824″ install Front Rail Seal on the truck’s front bed rail and install Premium Cap Seal 20ft or 23ft on the cap’s front and side base rails. OTHER QUALITY TRUCK CAP SEALS FROM ESI: To fill all bed rail gaps and for caps over 200 lbs and heavier weighted caps use Ultra Cap Seal 23ft (ASIN: B00MPMBIZW). For trucks with extra wide bed rails, to fill all bed rail gaps and for caps over 200 lbs use Super Cap Seal XL 23ft (ASIN: B00BNGBXOC). IMPORTANT: To completely seal out the elements install an ESI Ultimate Tailgate Seal with Taper Seal to the tailgate gap and sidewalls (ASIN: B00IPQWXZQ), sold separately. MADE IN USA
Características
23ft for mounting truck caps or camper shells that weigh 200 lbs or less. Fills small to medium bed rail gaps. Fits all bed lengths. High quality, long-lasting automotive grade, 18 PCF density EPDM rubber. Preferred by professional installers over PVC/foam seals. Excellent compression set resistance for maximum service life and vibration absorption Complete kit includes seal, butyl tape, alcohol pads and detailed instructions No need to replace this seal every time your cap is removed. MADE IN USA
El número de Modelo (ItemModelNumber)
‎PXL-23R
Peso
3.00 Pounds
Dimensiones
276 x 2 x 0,2 pulgadas
Fabricante es ‎Extruded Solutions
Destacados
23ft for mounting truck caps or camper shells that weigh 200 lbs or less. Fills small to medium bed rail gaps. Fits all bed lengths., High quality, long-lasting automotive grade, 18 PCF density EPDM rubber. Preferred by professional installers over PVC/foam seals., Excellent compression set resistance for maximum service life and vibration absorption, Complete kit includes seal, butyl tape, alcohol pads and detailed instructions, No need to replace this seal every time your cap is removed. MADE IN USA
La calificación que le dan a ESI Sello de tapa prémium XL de 23 pies (2 pulgadas de ancho x 0.200 pulgadas de alto x 23 pies de largo) caucho EPDM para tapas de 200 libras o menos, 220 usuarios es de 4.5 sobre 5 estrellas.