Descripción
Description: ☆ Material: ABS Plastic Housing ☆ Switch Length: 2-1/2″☆ Wiring Length: Approx 8″ Features: ☆ An easy replacement brake switch spring kit for most drum brake systems ☆ Fits most Motorcycle that use a two / 2 wire system, and a switch that threads ☆ Supplied with a spring that can be cut down to size ☆ Easy to install, no instructions required Fitment: ☆ Fit for more motorcycles, from Classic Bikes to Super Bikes, Pit Bikes to Quad Bikes / ATVs, Dirt Bikes, Monkey Bikes, Scooters and more ☆ Fit for Honda Z50, Z 50, Z-50, Z50A, etc☆ Fit for Honda GL / CB / CT / SL / CA / CL / VF / VT / XL / XR etc ☆ Fit for Kawasaki/NINJA, GPZ500, GPZ 500, etc☆ Fit for Suzuki GS400, GS 400, GS-400, GS500, etc ☆ Fit for Yamaha/Virago, Maxim, XJ, XS, XV, etc Install Notes: ☆ Before beginning work, disconnect the negative battery terminal. Remove the bolts securing your right rear set ☆ Do a side by side comparison of the new switch to the old switch and be sure it will work for your application ☆ Take note of the position of the old switch and place a mark or tape where the tip is while not extended ☆ Remove the spring from your brake pedal and then remove the switch from the mount ☆ To install the new switch, first place the threaded anchor into the mount on the rear set ☆ Next, thread the switch into the anchor until it is seated at the proper distance ☆ The tip of the new switch should nearly match up with the mark you placed before ☆ Some variation is normal and any slack can be taken up by sizing the spring ☆ Next, using your old spring as a guide, gently bend the ends of the new spring and attach one end to the switch, and the other to the brake pedal ☆ Now connect the wires to your bike wiring. It may be necessary to splice in connectors depe Package Included: 1x Motorcycle Rear Brake Stop Light Switch with 1x Steel Spring
CaracterÃsticas
☆Features: An easy replacement brake switch spring kit for most drum brake systems; Fits most Motorcycle that use a two / 2 wire system, and a switch that threads; Supplied with a spring that can be cut down to size. ☆ Fitment: Fit for more motorcycles, from Classic Bikes to Super Bikes, Pit Bikes to Quad Bikes / ATVs, Dirt Bikes, Monkey Bikes, Scooters and more; Fit for Honda Z50, Z 50, Z-50, Z50A, etc; Fit for Honda GL / CB / CT / SL / CA / CL / VF / VT / XL / XR etc; Fit for Kawasaki/NINJA, GPZ500, GPZ 500, etc; Fit for Suzuki GS400, GS 400, GS-400, GS500, etc; Fit for Yamaha/Virago, Maxim, XJ, XS, XV, etc. ☆ Install: Before beginning work,disconnect the negative battery terminal. Remove the bolts securing your right rear set,Take note of the position of the old switch and place a mark or tape where the tip is while not extended.Remove the spring from your brake pedal and then remove the switch from the mount.The tip of the new switch should nearly match up with the mark you placed before.Next gently bend the ends of the new spring and attach one end to the switch,and the other to the brake pedal. ☆ High Performance Motorcycle Rear Brake Stop Light Switch with Steel Spring made from ABS Plastic Housing Material, Easy to install, no instructions required. ☆ Package Includes: 1x Motorcycle Rear Brake Stop Light Switch with 1x Steel Spring.
Peso
1.00 Pounds
Fabricante es Jamal
Destacados
☆Features: An easy replacement brake switch spring kit for most drum brake systems; Fits most Motorcycle that use a two / 2 wire system, and a switch that threads; Supplied with a spring that can be cut down to size., ☆ Fitment: Fit for more motorcycles, from Classic Bikes to Super Bikes, Pit Bikes to Quad Bikes / ATVs, Dirt Bikes, Monkey Bikes, Scooters and more; Fit for Honda Z50, Z 50, Z-50, Z50A, etc; Fit for Honda GL / CB / CT / SL / CA / CL / VF / VT / XL / XR etc; Fit for Kawasaki/NINJA, GPZ500, GPZ 500, etc; Fit for Suzuki GS400, GS 400, GS-400, GS500, etc; Fit for Yamaha/Virago, Maxim, XJ, XS, XV, etc., ☆ Install: Before beginning work,disconnect the negative battery terminal. Remove the bolts securing your right rear set,Take note of the position of the old switch and place a mark or tape where the tip is while not extended.Remove the spring from your brake pedal and then remove the switch from the mount.The tip of the new switch should nearly match up with the mark you placed before.Next gently bend the ends of the new spring and attach one end to the switch,and the other to the brake pedal., ☆ High Performance Motorcycle Rear Brake Stop Light Switch with Steel Spring made from ABS Plastic Housing Material, Easy to install, no instructions required., ☆ Package Includes: 1x Motorcycle Rear Brake Stop Light Switch with 1x Steel Spring.
$124,777
InterruptoresMotorcycle Rear Brake Stop Light Switch with Steel Spring Kit Compatible for 1967-1969 Honda CL90 Scrambler
Disponibilidad: Hay existencias
Ventajas de Comprar en Yaxa
- EnvÃo GRATUITO
- Pagos seguros - La pasarela es la que procesa y almacena tu pago
- Compras Empresariales - Se entrega Factura Electrónica
- Compra Internacional
- Tiempo de entrega de 7 a 15 dÃas hábiles
☆Features: An easy replacement brake switch spring kit for most drum brake systems; Fits most Motorcycle that use a two / 2 wire system, and a switch that threads; Supplied with a spring that can be cut down to size., ☆ Fitment: Fit for more motorcycles, from Classic Bikes to Super Bikes, Pit Bikes to Quad Bikes / ATVs, Dirt Bikes, Monkey Bikes, Scooters and more; Fit for Honda Z50, Z 50, Z-50, Z50A, etc; Fit for Honda GL / CB / CT / SL / CA / CL / VF / VT / XL / XR etc; Fit for Kawasaki/NINJA, GPZ500, GPZ 500, etc; Fit for Suzuki GS400, GS 400, GS-400, GS500, etc; Fit for Yamaha/Virago, Maxim, XJ, XS, XV, etc., ☆ Install: Before beginning work,disconnect the negative battery terminal. Remove the bolts securing your right rear set,Take note of the position of the old switch and place a mark or tape where the tip is while not extended.Remove the spring from your brake pedal and then remove the switch from the mount.The tip of the new switch should nearly match up with the mark you placed before.Next gently bend the ends of the new spring and attach one end to the switch,and the other to the brake pedal., ☆ High Performance Motorcycle Rear Brake Stop Light Switch with Steel Spring made from ABS Plastic Housing Material, Easy to install, no instructions required., ☆ Package Includes: 1x Motorcycle Rear Brake Stop Light Switch with 1x Steel Spring.
Descripción
Información adicional
Peso | 1.00 lbs |
---|
Valoraciones (0)
Solo los usuarios registrados que hayan comprado este producto pueden hacer una valoración.
Valoraciones
No hay reseñas todavÃa