Portable 48 Gallon Fuel Tank with Pump for Gasoline & Diesel, 15GPM High Flow Rate 12V DC Self-Priming Fuel Transfer Pump, 13.1ft Hose, Auto Fueling

Lo más importante

Fuel Transfer & Lubrication de la marca SHEPUMP

• Marca: SHEPUMP
• Categoría: Fuel Transfer & Lubrication
• Dimensiones: 36.22 x 24.8 x 22.44 pulgadas
• Valoraciones: 83

Datos técnicos destacados

• Dimensiones reportadas: 36.22 x 24.8 x 22.44 pulgadas (92.0 x 63.0 x 57.0 cm).
• 83 valoraciones visibles.
• Disponible desde enero de 2023.

Preguntas resueltas

STRONG POWER - This Fuel Transfer Pump Kit features a Self-Priming 12V DC pump with a flow rate up to 15GPM . Delivery Hose: 4m; Suction Hose: 1m CAPACITY - Our tank cpuld hold 48Gal/180L of fuel, the left side could accommodate an fuel pump and oil pipe, the recess on the right side could accommodate idle tools, it is safe and convenient to use in any place. The tank body is made of petrol-grade polyethylene material, for resisting corrosion and denting CONVENIENT - The power of the pump is strong so that you don’t need to lift the barrels and tanks making for very convenient on-site transfer of fuel from barrels and drums to vehicles and equipment. SUITABLE FOR DIFFERENT USE - 12V battery connecters let you run the pump with cars, motorcycles, vans, quads and other 12V vehicles. APPLICATION - This product is a gasoline pump, could transport gasoline, diesel and kerosene, safe and reliable, please choose according to your needs. The fuel nozzle is designed to refuel vehicles such as motorcycles, agricultural machinery, and ATVs, but it is not suitable for family cars with small refueling ports. NOTE - 1.Please loosen the vent cap when using and tighten it after use. 2.Please loosen the vent screw regularly. As fuel volatilization will produce gas, especially gasoline, the tank may deform due to increasing pressure and gas will even leak from the joint of the pump. 3.Check all the connections and tighten the screws and clamps again before use, as they may become loose during transportation, you can also put on some tape. 4.Keep the pump 'OFF' when not use. When you'd like use the pump, connect to the car battery first, turn on the nozzle, and then press the 'ON' button. When it is done, press the 'OFF' button first, and then disconnect the battery.