Descripción
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool – it’s completely waterproof. This marine amp is compatible with a variety of head units and sources. For protection, count on the heavy duty aluminum alloy heatsink to prevent overheating, as well as thermal, overload, and short circuit protection. Comes complete with mounting screws and hardware. Features: Bridgeable Audio Amplifier 2-Channel System Dual MOSFET Power Supply Marine Grade Construction Waterproof Marine Rating IP-01 Stereo / Bridge Mode Selection Switch Adjustable Input GAIN Level Control RCA (L/R) Input Connector Jacks High Level Speaker Input Connector Power & Protection LED Indicator Lights Gold-Plated Speaker Output Terminal Connectors Crossover Frequency Control Anti-Thump Delay Circuitry Built-in Thermal, Overload & Speaker Short Protection Heavy Duty Aluminum Alloy Heatsink Remote Turn ON/OFF Technical Specs: MAX Power: 400 Watt RMS Power: 200 Watt Amplifier Class: AB Fuse Type: 15A Crossover Frequency Adjustable: 40 – 450Hz Frequency Response: 10 – 30kHz +/-3dB Input Impedance: 10k Ohms Input Sensitivity: 250mV-1V Matching Speaker Impedance: 4-8 Ohms T.H.D.: <0.04% Power Supply: DC 12V Dimensions (L x W x H): 10.0'' x 7.9'' x 2.0'' Sold as: Unit Weight: 5.09 lbs. Características PREMIUM 2 CHANNEL AMPLIFIER: Pyle’s PLMRA200 is engineered as a 2 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units. RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs. SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions. POWERFUL 400 WATT: This amplifier is powerful with its 400 WATT MAX and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance. MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use. Note: Ensure that the power source is the correct voltage/amperage, also check the wiring and speaker load El número de Modelo (ItemModelNumber) PLMRA200 Peso 5.00 Pounds Dimensiones 10 x 7,87 x 2 pulgadas Fabricante es Pyle Destacados PREMIUM 2 CHANNEL AMPLIFIER: Pyle’s PLMRA200 is engineered as a 2 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units., RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs., SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions., POWERFUL 400 WATT: This amplifier is powerful with its 400 WATT MAX and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance., MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use., Note: Ensure that the power source is the correct voltage/amperage, also check the wiring and speaker load La calificación que le dan a PYLE PLMRA400 Amplificador de 4 canales, de 400W, 2 canales, Aluminio, 135 usuarios es de 3.9 sobre 5 estrellas.