High Output Invader style Guitar Humbucker Pickups Ceramic Magnet Neck and Bridge Pickups For Electric Guitar Parts (Black)

Descripción
Product Description This humbucker open ceramic magnet guitar pickup with black umbrella-head screws fits for double humbucker guitar. With super-high output, it fits for Punk Metal or other heavy metal rock style. 12pcs of adjustable umbrella-head screws offer you the convenience to adjust the timbre. Meanwhile, the open design make the output volume clear and bright. Specification: Material: Metal and Plastic H represents Double Coil, O represents big holes on both sides, C represents ceramic magnets Pin: umbrella SHCS adjustable pin Magnet: Ceramic magnets Resistance: N: 7.2 ± 0.3K; B: 15 ± 0.5K Inductance: N/B:3.5H/7H Neck Pickup hole spacing : 50mm Bridge pickup hole spacing: 52mm Cable: Four Conduct with Shield Color：Black,White,Red ,Purple ,Zebra Pakcage Include: 1 x Pair of Guitar Humbucker Pickup 4 x Mounting screws 4 x Spring Note: The hole is towards the bottom of the guitar, and the direction of the neck and the bridge should be the same. Note: The color of the item may vary slightly due to photography and your own computer
Características
It is the standard style for 5-wire pickups..Applicable both guitar, high output for punk, metal and other heavy metal rock style. The hole spacing of the bridge pickup is 52mm, The hole spacing of the other pickup is 50mm Wiring method: Black and Bare were pre-soldered together for the ground, green and white were pre-soldered for the coils, and red was by itself for the hot signal out. The two colored wires that come soldered together are for coil splitting, if not splitting, simply fold it over and seal exposed wire so its protected from ground out on interior electronics. Install the same as existing wiring to pot or switch. It is convenience for you to adjust the timbre with the adjustable umbrella-head screws Magnet: Ceramic Bar Pakcage Include: 1 x Pair of Guitar Humbucker Pickup 4 x Mounting screws 4 x Spring Pads: Maple pads Coil Polarity: Neck South&north/Bridge North&SouthCoil winding direction: neck clockwise CW/Bridge clockwise CWPackage Included: 1 x Neck Humbucker Pickup 1 x Bridge Humbucker Pickup 4 x Screws 4 x Springs
El número de Modelo (ItemModelNumber)
SPWKSYQ
Peso
1.00 Pounds
Dimensiones
5,7 x 4,1 x 1,4 pulgadas
Destacados
It is the standard style for 5-wire pickups..Applicable both guitar, high output for punk, metal and other heavy metal rock style., The hole spacing of the bridge pickup is 52mm, The hole spacing of the other pickup is 50mm, Wiring method: Black and Bare were pre-soldered together for the ground, green and white were pre-soldered for the coils, and red was by itself for the hot signal out. The two colored wires that come soldered together are for coil splitting, if not splitting, simply fold it over and seal exposed wire so its protected from ground out on interior electronics. Install the same as existing wiring to pot or switch., It is convenience for you to adjust the timbre with the adjustable umbrella-head screws, Magnet: Ceramic Bar, Pakcage Include: 1 x Pair of Guitar Humbucker Pickup 4 x Mounting screws 4 x Spring, Pads: Maple pads, Coil Polarity: Neck South&north/Bridge North&South, Coil winding direction: neck clockwise CW/Bridge clockwise CW, Package Included: 1 x Neck Humbucker Pickup 1 x Bridge Humbucker Pickup 4 x Screws 4 x Springs
La calificación que le dan a High Output Invader style Guitar Humbucker Pickups Ceramic Magnet Neck and Bridge Pickups For Electric Guitar Parts (Black), 3 usuarios es de 4.6 sobre 5 estrellas.
El País de Origen (COO, siglas en inglés) o fabricación del producto High Output Invader style Guitar Humbucker Pickups Ceramic Magnet Neck and Bridge Pickups For Electric Guitar Parts (Black) es China.