Product Description Amplificador de potencia estéreo de 2 x 120 W, mini amplificador de potencia estéreo - 2 x 120 W con CD AUX y entradas de micrófono, salida RCA REC, conector de entrada de micrófono de 1/4 pulgadas, conector de auriculares indicador LED de encendido 110/220, selector de voltaje de 2 x 120 vatios máximo a nivel de salida LED azul de 4 ohmios. Pantalla 3 0.197 in Conector de entrada auxiliar de CD/MP3 conmutable con micrófono y modos de mezcla, cuatro terminales de altavoz L/R conmutables AUX1/AUX2/CD y RCA Entrada agudos graves, control de volumen maestro y micrófono, dimensiones 8 27 pulgadas de ancho x 2 72 pulgadas de alto x 5 39 pulgadas de profundidad. El amplificador Pyle PTA4 Home es perfecto para alimentar cualquier sistema estéreo completo con Entradas AUX/CD y 2 x 120 vatios de potencia: este amplificador fácil de usar y duradero tiene controles de graves y agudos, una pantalla de nivel de salida LED azul resbaladiza entradas L/R RCA y 4 salidas de altavoz. Utiliza circuitos sofisticados y componentes premium para una musicalidad sin concesiones: este producto es famoso por ofrecer un sonido potente y preciso. Este amplificador pequeño pero potente ofrece audio claro y nítido para que escucha. Duradero y asequible From the Manufacturer Front View Click here for a larger image Connection Diagram Click here for a larger image Back View Click here for a larger image Stereo Power Amplifier Click here for a larger imageThe Ultimate Stereo Power AmplifierThis amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores and, at home --the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.Switchable Mixing (Karaoke) ModeWhen set to 'mixing' the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)Switchable MIC Pager ModeWhen set to 'pager' the signal from AUX1, AUX2, & CD will be attenuated by -12 dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system. Push Type Speaker TerminalsLets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode. 110/220 Voltage SelectorThis amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating. .14-Inch AUX-In JackThe .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players, etc..25-Inch Phone JackAccepts headphones with .25-inch plugs..25-Inch Microphone Input JackAccepts microphones with .25-inch plugs.REC RCA OutputLets you connect the amplifier to a tape deck for recording.Take ControlUse the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and trebleReplaceable Power FuseThe amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)Additional FeaturesHarmonic Distortion: 0.3%2 x 120 Watt RMS at four OhmsBlue LED Output Level Display Frequency Response: 20 Hz-40 kHz Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches) Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz Tone Controls: Bass & Treble: +/-12 dB (100 Hz/10 kHz)Dimensions: 8.27 x 2.72 x 5.39 inches
